IBM Computer, Laptops and Servers

How To Fillet Fish - *P Cooking Class

Recipe

Title:

How To Fillet Fish - *P Cooking Class

Categories:

Fish/sea

Yield:

1 servings

Directions

1. ~

   SOLE FOOD

   The into steaks for grilling, or leave it whole for baking or poaching.
2. But if confronted by a thin Dover sole when craving fish and chips, or a pudgy salmon when you want slivers of gravlax, it's good to know how to fillet the fish yourself.
3. While both flatfish and roundfish can be filleted, they are approached differently.
4. A flatfish is easy to spot; it looks as if it has been run over by some underworld tractor.
5. Flatfish swim horizontally along the sea bottom, with both eyes facing upward.
6. You can obtain four nearly equal fillets from a flatfish, one from either side of the backbone on both sides.
7. To fillet a flatfish (sole, flounder, turbot, Pacific halibut): Peel it by laying it flat on a counter with the dark side up and the tail towards you.
8. Slice off the tail, and insert the tip of a knife until you have a grip on the skin.
9. Holding the tail in place, pull the skin back towards the head, over the head, and then down the light colored side.
10. Lay the fish on the counter with its eyes facing up.
11. Cut down the backbone along the center of the fish, then hold your knife at an angle at the head end of one fillet.
12. Lift the fillet with one hand, while scraping gently with small strokes, using the bone structure to guide the knife.
13. Cut away the second fillet from the first side.
14. Turn the fish over and repeat the process.
15. Roundfish, shaped like a tube, have a center backbone, separating two thick fillets.
16. A line of bones extends upward from the spine, and a pair of bone creates an oval on the lower side of the fish, enclosing the entrails.
17. You can create four fillets, but usually one is cut from each side.
18. To fillet: Lay the fish on one side, with its tail towards you.
19. Slice along the backbone from head to tail, exposing the backbone.
20. Hold a knife parallel to the top ribs, cut down the length of the fillet, using short strokes to detach it completely.
21. Turn fish around, hold it by the exposed backbone, and slice the other half of the fillet free.
22. Flip the fish over, and fillet the other side.
23. To skin fillets, lay them skin side down, and hold the tail end.
24. Insert the knife at the shallow end and scrape along the skin to separate the it from the fillets.
25. Run your fingers all along the top of the fillet and feel for pesky little bones.
26. They can easily be removed with tweezers, a gesture that will be greatly appreciated by all who eat it.

[ Comment, Edit or Article Submission ]